Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SchmuFoo

Pages: [1] 2 3 4
1
GUI / Monitoring VLAN Traffic for VTAP Interface with SMON?
« on: January 10, 2019, 01:23:39 PM »
Hello,

I have configured a few VTAP Interfaces for SMON Monitoring on an Enterasys Switch.

According to..

http://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?module=SMON-MIB&fournisseur=ietf

I should use..

http://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.16.22.1.2.2.1.5

.. for this.

Does NeDi Support this?


NeDi Discovery sees the Interface during discovery as:

Code: [Select]
IF :100099 vtap.0.999 0 - 3 0 IEEE 802.1Q VLA 0
On the Device-Status.php it shows up as Interface with Name: "IEEE 802.1Q VLAN 999 Tap Interface"

But when I open up the rt-popup.php, I can't see the Traffic -> "Cannot get data about interface 1000999"

Code: [Select]
Switch(su)->show smon vlan

Data Source      : vtap.0.999
Status           : Enabled
Last Enable Time : 2019-01-10 11:46:54
Owner            : (none)
--------------------------------------

Vlan    NonUnicast Packets     NonUnicast Octets         Total Packets          Total Octets
----  --------------------  --------------------  --------------------  --------------------
999                    460                 41572                 60803              10695850


Cheers,
Jan

P.S.: I'm also not able to do a normal snmpget for ifInOctets for that interface (Altough I'm not sure why NeDi Discovery says 100099 but rt-popup is mentioning 1000999)

Code: [Select]
X:/usr/share/snmp/mibs # snmpget -v2c -c X 10.23.10.252 ifInOctets.1000999
IF-MIB::ifInOctets.1000999 = No Such Instance currently exists at this OID

X:/usr/share/snmp/mibs # snmpget -v2c -c X 10.23.10.252 ifInOctets.100099
IF-MIB::ifInOctets.100099 = No Such Instance currently exists at this OID

2
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: January 09, 2019, 02:08:10 PM »
Does the lastseen timestamp still get updated on those nodes? When you add debugging (-db), you should see lines like this:

DBG :$mc on $if vl$vl ignored due to NOP

Oh you have right, I didn't realize that the timestamp was not updated any longer. In the meantime the wrong mapping is gone on my test-switch (I think after round about 30 days).

Is there a manuall way to "re-map" old entrys, without deleting the Nodes? I would like to keep the Node Details and History, but want to get rid of the old wrong mappings.

3
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: November 28, 2018, 03:05:46 PM »
Thanks, but it seems it doesnt work for me -> Nodes are still there -> See Screenshots from System-Database.php

@kami and @all: Any idea what I else can do? (See Post before)

Thanks,
Jan

4
Update, only one last switch doesnt "switch" from IP to sysname and it still mapped to a "Class Node Event" (Monitoring-Events.php)

(Also this Device BaseMAC (Enterasys) is listed in nedi.conf under ignoredmac - See https://forum.nedi.ch/index.php?topic=2156.0)

Problem gone since changing the Hostnamen on the Switch

5
Discovery / Re: Extreme Networks EDP
« on: November 12, 2018, 03:14:35 PM »
Don't know but LLDP works great on all kind of Extreme Summit Switches..

6
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: November 07, 2018, 02:46:43 PM »
Thanks, but it seems it doesnt work for me -> Nodes are still there -> See Screenshots from System-Database.php

7
OKey, I have to use 10000000 instead of 10M  ::) 8)

8
Hello Community,

I would like to get an overview about all Ethernetsports which are only negotiated with 10Mbit/s.

Tried it via Devices-Interfaces.php and with..

(IF Type = '6' AND Status = '3') AND (Speed = '10M')

.. but I don't get any results. Only when I filter only for Type 6 and Status 3.

What I'm doing wrong with the RegEx :)?


Thanks,
Jan

9
Discovery / VLAN Index OID for "VMware ESXi" ?
« on: October 25, 2018, 06:43:52 PM »
Hello,

does anyone have the SNMP OID for VLAN Index on "VMware ESXi.6.5.0.9298722.2.57" (SysObjId 1.3.6.1.4.1.6876.4.1) ?

At the moment I only get the correct VLAN Names via f.e.:

enterprises.6876.2.4.1.4.1.4: "TEST_FOO-VLAN054"


Cheers,
Jan

10
Discovery / Re: VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 04:05:11 PM »
Got it  :)

1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.4

Found on http://www.oidview.com/mibs/11/HPVC-MIB.html

11
Discovery / Re: All Nodes only see on the core Switch
« on: October 25, 2018, 03:52:09 PM »
Sounds similiar to Enterasys; See here including feedback from Remo

https://forum.nedi.ch/index.php?topic=2167.0

12
Discovery / Re: VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 03:50:09 PM »
With regards to the VLAN Index OID I tried: http://www.circitor.fr/Mibs/Html/H/HPVC-MIB.php

13
Discovery / VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 03:48:15 PM »
Hello,

does anyone have the SNMP OID for VLAN Index on "HP VC Flex-10/10D Module 4.62 2018-01-26T07:20:40Z" (SysObjId 1.3.6.1.4.1.11.5.7.5.4) ?

I got the correct VLAN Names via f.e.:

enterprises.11.5.7.5.2.1.1.6.1.1.2.1: "VC1_VLAN10_ilo"

But when I try to map this to the VLAN ID, I didn't get the VLAN ID 10 but VLAN 1:

enterprises.11.5.7.5.2.1.1.6.1.1.1.1: 1


Thanks,
Jan

14
Discovery / Re: pb decoding MAC wih HPVC HP VC FlexFabric 10Gb/24-Port
« on: October 25, 2018, 03:39:31 PM »
Hello Richard,

[..]
I don't know if other people using HPVC HP VC FlexFabric 10Gb/24-Port have the same problems.

Tx
richard

Semi-Offtopic: Do you have a proper VLAN Name and VLAN Index Mapping in your setup? I get the VLAN Names with OID 1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.2 but I didn't find the OID to the proper VLAN ID.

Cheers,
Jan

15
Definition Files / Re: HP and hirschman def files request
« on: October 22, 2018, 12:12:32 PM »
HP:

PS1810-8G
1.3.6.1.4.1.11.2.3.7.11.158.def


# Definition for 1.3.6.1.4.1.11.2.3.7.11.168 created by Defgen 2.0 on 17.Oct 2018 (JanSte)
 
# Main
SNMPv____2HC
Type____1820-248G(J9980A)
Typoid____
Sysdes____
OS____other
Icon____w2gp
Size____1
TempAlert____
Bridge____qbri
ArpND____
Dispro____LLDP
Serial____1.3.6.1.4.1.11.2.36.1.1.2.9.0
Bimage____1.3.6.1.4.1.11.2.36.1.1.2.6.0
CfgChg____
CfgWrt____
FTPConf____
VLnams____1.3.6.1.2.1.17.7.1.4.3.1.1
VLnamx____
Group____
Mode____
 
# Interfaces
StartX____
EndX____
IFname____1.3.6.1.2.1.31.1.1.1.1
IFaddr____old____
IFalia____1.3.6.1.2.1.31.1.1.1.18
IFalix____
InBcast____1.3.6.1.2.1.31.1.1.1.3
InDisc____1.3.6.1.2.1.2.2.1.13
OutDisc____1.3.6.1.2.1.2.2.1.19
IFvlan____1.3.6.1.2.1.17.7.1.4.5.1.1
IFvlix____1.3.6.1.2.1.17.7.1.4.5.1.1
IFpowr________
IFpwix____
IFdupl____1.3.6.1.2.1.10.7.2.1.19
IFduix____
Halfdp____2
Fulldp____3
 
# Modules
Modesc____
Moclas____
Movalu____
Moslot____
Modhw____
Modsw____
Modfw____
Modser____
Momodl____
Modloc____
Mostat____
Mostok____
 
# RRD Graphing
CPUutl________
Temp________
MemCPU________
Custom________

Pages: [1] 2 3 4