Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - SchmuFoo

Pages: [1] 2
Installation / Update MAC Vendor OUI Database?
« on: November 18, 2019, 11:59:08 AM »

don't remember anymore how the procedure was to update the MAC Vendor Database?

Update /var/nedi/inc/oui.csv and run /var/nedi/nedi.pl -N oui ?

If yes, some good source avaible for wget an oui.csv?


Discovery / PWR: Total used power is 0W
« on: June 06, 2019, 04:56:22 PM »

just updated to NeDi 1.9 and saw the following new output during Re-Discovery:

TYPE:X460G2-48t-10G4 (using
LOAD:System load is 1%
MEM :Available memory 652 KBytes
TEMP:Temperature is 58 Degrees Celcius
PWR :Max PSE power is 0W
PWR :Total used power is 0W


But I don't see any Power Values on the Device-Status and in the Defintion file  ::)

BTW the OID should be:


Source: https://gtacknowledge.extremenetworks.com/articles/How_To/What-is-the-SNMP-OID-to-retrieve-System-Power-Usage


Discovery / Events: LLDW link changed type from LLDD to LLDW
« on: February 26, 2019, 01:31:48 PM »
I have various "HP VC Flex-10/10D Module" as Devices and during every Discovery-Cycle I see messages like:

d4v1 is LLDW link changed type from LLDD to LLDW
d2v1 is LLDD link changed type from LLDW to LLDD

What does this mean? I know LLDP but what is LLDD and LLDW?

GUI / Display (f.e.) Number of Devices on Top and not Bottom of Table
« on: February 05, 2019, 03:32:18 PM »
At the moment when displaying f.e. all devices, you have to scroll down the whole list to get the info a la "82 Devices, Sort: device, Limit: 250 ".

I would like to see that info (additionally) in the top section of the table, so you don't have to scroll.


GUI / Monitoring VLAN Traffic for VTAP Interface with SMON?
« on: January 10, 2019, 01:23:39 PM »

I have configured a few VTAP Interfaces for SMON Monitoring on an Enterasys Switch.

According to..


I should use..


.. for this.

Does NeDi Support this?

NeDi Discovery sees the Interface during discovery as:

Code: [Select]
IF :100099 vtap.0.999 0 - 3 0 IEEE 802.1Q VLA 0
On the Device-Status.php it shows up as Interface with Name: "IEEE 802.1Q VLAN 999 Tap Interface"

But when I open up the rt-popup.php, I can't see the Traffic -> "Cannot get data about interface 1000999"

Code: [Select]
Switch(su)->show smon vlan

Data Source      : vtap.0.999
Status           : Enabled
Last Enable Time : 2019-01-10 11:46:54
Owner            : (none)

Vlan    NonUnicast Packets     NonUnicast Octets         Total Packets          Total Octets
----  --------------------  --------------------  --------------------  --------------------
999                    460                 41572                 60803              10695850


P.S.: I'm also not able to do a normal snmpget for ifInOctets for that interface (Altough I'm not sure why NeDi Discovery says 100099 but rt-popup is mentioning 1000999)

Code: [Select]
X:/usr/share/snmp/mibs # snmpget -v2c -c X ifInOctets.1000999
IF-MIB::ifInOctets.1000999 = No Such Instance currently exists at this OID

X:/usr/share/snmp/mibs # snmpget -v2c -c X ifInOctets.100099
IF-MIB::ifInOctets.100099 = No Such Instance currently exists at this OID

Hello Community,

I would like to get an overview about all Ethernetsports which are only negotiated with 10Mbit/s.

Tried it via Devices-Interfaces.php and with..

(IF Type = '6' AND Status = '3') AND (Speed = '10M')

.. but I don't get any results. Only when I filter only for Type 6 and Status 3.

What I'm doing wrong with the RegEx :)?


Discovery / VLAN Index OID for "VMware ESXi" ?
« on: October 25, 2018, 06:43:52 PM »

does anyone have the SNMP OID for VLAN Index on "VMware ESXi." (SysObjId ?

At the moment I only get the correct VLAN Names via f.e.:

enterprises.6876. "TEST_FOO-VLAN054"


Discovery / VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 03:48:15 PM »

does anyone have the SNMP OID for VLAN Index on "HP VC Flex-10/10D Module 4.62 2018-01-26T07:20:40Z" (SysObjId ?

I got the correct VLAN Names via f.e.:

enterprises. "VC1_VLAN10_ilo"

But when I try to map this to the VLAN ID, I didn't get the VLAN ID 10 but VLAN 1:

enterprises. 1


Discovery / Exclude Nodes from LAG Interfaces?
« on: October 05, 2018, 01:22:52 PM »
Hello Community,

how can I exclude LAG Interface from the Node Population Feature?

Unfortunately my Nodes are mapped to the Coreswitch LAG Interfaces, instead to the there connected Accessswitch and the corresponding Real Edge-Ports.

When I Re-Discover the Accessswitch I see the nodes there, but only until the next Cron/Manual Re-Discovery of the Core..


Hi all,

I'm just wondering how I can map syslog messages to the real Device-Name and also embed that messages in the Event List on specific Devices-Status.php page?

At the Moment on Monitoring-Events.php the Source Row ist showing the IP Address of the incoming syslog messages (activated via System - Services, Port UDP 1514)


Discovery / Write Nodes: "Loop .. belongs to this device .."
« on: August 16, 2018, 11:47:17 AM »
Hello Community,

I created the def file https://forum.nedi.ch/index.php?topic=2145.0 earlier and can now spend a bit more time with it.

One of my problems is, that during discovery I always get messages like:

Code: [Select]
Write Nodes ------------------------------------------------------------------
LOOP:001f45a0481d on tg.13.8 vl12 belongs to this device ...!

In the Forum I found on old Thread (https://forum.nedi.ch/index.php?topic=1944.msg8589#msg8589) covering something similiar, but the solution was for an very old NeDi version.

Someone found a fix for the current one?

Thanks & Cheers,

Definition Files / Enterasys 7100-Series
« on: May 09, 2018, 05:42:42 PM »
Definition for created by Defgen 2.0

Definition Files / Enterasys S8-Chassis Bonded
« on: May 09, 2018, 05:41:43 PM »
Definition for created by Defgen 2.0

Definition Files / Enterasys B5K125-48 SecureStack
« on: May 09, 2018, 05:40:13 PM »
Definition for created by Defgen 2.0

Definition Files / Enterasys S4 Chassis
« on: May 09, 2018, 05:39:49 PM »
Definition for created by Defgen 2.0

Pages: [1] 2