Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SchmuFoo

Pages: [1] 2 3 4
1
GUI / Display (f.e.) Number of Devices on Top and not Bottom of Table
« on: February 05, 2019, 03:32:18 PM »
At the moment when displaying f.e. all devices, you have to scroll down the whole list to get the info a la "82 Devices, Sort: device, Limit: 250 ".

I would like to see that info (additionally) in the top section of the table, so you don't have to scroll.


Cheers


2
GUI / Re: Monitoring VLAN Traffic for VTAP Interface with SMON?
« on: February 05, 2019, 03:24:36 PM »
One step closer: smonVlanIdStatsTotalOctets:

http://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.16.22.1.2.2.1.7

Based on an SNMPwalk of that, my specific VLAN Index-Mapping is:

The instance for VLAN 99 is .1.99
The instance for VLAN 999 is .2.999

So for my queries:

Code: [Select]
nedi01-bn:~ # snmpget -v2c -c .. IP 1.3.6.1.2.1.16.22.1.2.2.1.7.1.99
RMON-MIB::rmon.22.1.2.2.1.7.1.99 = Counter64: 147497497837163

nedi01-bn:~ # snmpget -v2c -c .. IP 1.3.6.1.2.1.16.22.1.2.2.1.7.2.999
RMON-MIB::rmon.22.1.2.2.1.7.2.999 = Counter64: 125397217538


Now the only question is, can I map those OID values to the Graph under https://nedi.foobar.tld/Devices-Graph.php?dv=DEVICENAME&if[]=vtap.0.999&it[]=t and rt-popup? The will be needed some calculation to compare the delta between two values (Bytes) and optional to rewrite it to bps instead of Bps..

3
GUI / Monitoring VLAN Traffic for VTAP Interface with SMON?
« on: January 10, 2019, 01:23:39 PM »
Hello,

I have configured a few VTAP Interfaces for SMON Monitoring on an Enterasys Switch.

According to..

http://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?module=SMON-MIB&fournisseur=ietf

I should use..

http://cric.grenoble.cnrs.fr/Administrateurs/Outils/MIBS/?oid=1.3.6.1.2.1.16.22.1.2.2.1.5

.. for this.

Does NeDi Support this?


NeDi Discovery sees the Interface during discovery as:

Code: [Select]
IF :100099 vtap.0.999 0 - 3 0 IEEE 802.1Q VLA 0
On the Device-Status.php it shows up as Interface with Name: "IEEE 802.1Q VLAN 999 Tap Interface"

But when I open up the rt-popup.php, I can't see the Traffic -> "Cannot get data about interface 1000999"

Code: [Select]
Switch(su)->show smon vlan

Data Source      : vtap.0.999
Status           : Enabled
Last Enable Time : 2019-01-10 11:46:54
Owner            : (none)
--------------------------------------

Vlan    NonUnicast Packets     NonUnicast Octets         Total Packets          Total Octets
----  --------------------  --------------------  --------------------  --------------------
999                    460                 41572                 60803              10695850


Cheers,
Jan

P.S.: I'm also not able to do a normal snmpget for ifInOctets for that interface (Altough I'm not sure why NeDi Discovery says 100099 but rt-popup is mentioning 1000999)

Code: [Select]
X:/usr/share/snmp/mibs # snmpget -v2c -c X 10.23.10.252 ifInOctets.1000999
IF-MIB::ifInOctets.1000999 = No Such Instance currently exists at this OID

X:/usr/share/snmp/mibs # snmpget -v2c -c X 10.23.10.252 ifInOctets.100099
IF-MIB::ifInOctets.100099 = No Such Instance currently exists at this OID

4
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: January 09, 2019, 02:08:10 PM »
Does the lastseen timestamp still get updated on those nodes? When you add debugging (-db), you should see lines like this:

DBG :$mc on $if vl$vl ignored due to NOP

Oh you have right, I didn't realize that the timestamp was not updated any longer. In the meantime the wrong mapping is gone on my test-switch (I think after round about 30 days).

Is there a manuall way to "re-map" old entrys, without deleting the Nodes? I would like to keep the Node Details and History, but want to get rid of the old wrong mappings.

5
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: November 28, 2018, 03:05:46 PM »
Thanks, but it seems it doesnt work for me -> Nodes are still there -> See Screenshots from System-Database.php

@kami and @all: Any idea what I else can do? (See Post before)

Thanks,
Jan

6
Update, only one last switch doesnt "switch" from IP to sysname and it still mapped to a "Class Node Event" (Monitoring-Events.php)

(Also this Device BaseMAC (Enterasys) is listed in nedi.conf under ignoredmac - See https://forum.nedi.ch/index.php?topic=2156.0)

Problem gone since changing the Hostnamen on the Switch

7
Discovery / Re: Extreme Networks EDP
« on: November 12, 2018, 03:14:35 PM »
Don't know but LLDP works great on all kind of Extreme Summit Switches..

8
Discovery / Re: Exclude Nodes from LAG Interfaces?
« on: November 07, 2018, 02:46:43 PM »
Thanks, but it seems it doesnt work for me -> Nodes are still there -> See Screenshots from System-Database.php

9
OKey, I have to use 10000000 instead of 10M  ::) 8)

10
Hello Community,

I would like to get an overview about all Ethernetsports which are only negotiated with 10Mbit/s.

Tried it via Devices-Interfaces.php and with..

(IF Type = '6' AND Status = '3') AND (Speed = '10M')

.. but I don't get any results. Only when I filter only for Type 6 and Status 3.

What I'm doing wrong with the RegEx :)?


Thanks,
Jan

11
Discovery / VLAN Index OID for "VMware ESXi" ?
« on: October 25, 2018, 06:43:52 PM »
Hello,

does anyone have the SNMP OID for VLAN Index on "VMware ESXi.6.5.0.9298722.2.57" (SysObjId 1.3.6.1.4.1.6876.4.1) ?

At the moment I only get the correct VLAN Names via f.e.:

enterprises.6876.2.4.1.4.1.4: "TEST_FOO-VLAN054"


Cheers,
Jan

12
Discovery / Re: VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 04:05:11 PM »
Got it  :)

1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.4

Found on http://www.oidview.com/mibs/11/HPVC-MIB.html

13
Discovery / Re: All Nodes only see on the core Switch
« on: October 25, 2018, 03:52:09 PM »
Sounds similiar to Enterasys; See here including feedback from Remo

https://forum.nedi.ch/index.php?topic=2167.0

14
Discovery / Re: VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 03:50:09 PM »
With regards to the VLAN Index OID I tried: http://www.circitor.fr/Mibs/Html/H/HPVC-MIB.php

15
Discovery / VLAN Index OID for "HP VC Flex-10/10D Module" ?
« on: October 25, 2018, 03:48:15 PM »
Hello,

does anyone have the SNMP OID for VLAN Index on "HP VC Flex-10/10D Module 4.62 2018-01-26T07:20:40Z" (SysObjId 1.3.6.1.4.1.11.5.7.5.4) ?

I got the correct VLAN Names via f.e.:

enterprises.11.5.7.5.2.1.1.6.1.1.2.1: "VC1_VLAN10_ilo"

But when I try to map this to the VLAN ID, I didn't get the VLAN ID 10 but VLAN 1:

enterprises.11.5.7.5.2.1.1.6.1.1.1.1: 1


Thanks,
Jan

Pages: [1] 2 3 4