Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]

Author Topic: DOM values  (Read 5902 times)

swepart

  • Newbie
  • *
  • Posts: 44
    • View Profile
DOM values
« on: September 14, 2019, 11:57:29 pm »
Every type of fiber interface have there dampening values..   Can we handle different type of SFPs with correct values


Vendor   Model   Type   Fibertype   Wave   Distance   Min Tx   Max Tx   Känslighet   Min budg   Max budg   Max Rx
Canary   CFT-2061   SC   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CCM-1241   SC   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CFT-2062   ST   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CCM-1242   ST   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CFT-2061-SM   SC   SM   1310nm   30km   -15dBm   -8dBm   -34dBm   19dBm   26dBm   -7dBm
Canary   CFT-2062-SM   ST   SM   1310nm   30km   -15dBm   -8dBm   -34dBm   19dBm   26dBm   -7dBm
Canary   CFT-2081-SM   SC   SM   1310nm   18km   -16dBm   -9dBm   -34dBm   18dBm   25dBm   -7dBm
Cisco   WS-G5484   SC   MM   850nm   550m   -9,5dBm   -3dBm   -17dBm   7,5dBm   14dBm   0dBm
Cisco   WS-G5486   SC   SM   1310nm   10km   -9,5dBm   -3dBm   -19dBm   9,5dBm   16dBm   -3dBm
Cisco   WS-G5487   SC   SM   1550nm   70-100km   0dBm   5dBm   -23dBm   23dBm   28dBm   -3dBm
Cisco   CWDM-1550   SC   SM   1550nm      1dBm   5dBm            
Cisco   GLC-SX-MM   LC   MM   850nm   550m   -9,5dBm   -3dBm   -17dBm   7,5dBm   14dBm   0dBm
Cisco   GLC-LH-SM   LC   SM   1310nm   10km   -9,5dBm   -3dBm   -19dBm   9,5dBm   16dBm   -3dBm
Cisco   GLC-LX-SM   LC   SM   1310nm   10km   -11dBm   -3dBm   -19dBm   8dBm   16dBm   -3dBm
Cisco   GLC-EX-SM   LC   SM   1310nm   40km   -1 dBm   3dBm   -22dBm   21dBm   25dBm   +1dBm
Cisco   GLC-ZX-SM   LC   SM   1550nm   70-100km   0dBm   5dBm   -23dBm   23dBm   28dBm   -3dBm
Cisco   SFP-GE-L   LC   SM   1300nm   10km   -9,5dBm   -3dBm   -20dBm   11,5dBm   16dBm   -3dBm
Cisco   X2-10GB-LR   SC   SM   1310nm   10km   -8,2dBm   -0,5dBm   -14,4dBm   6,2dBm   13,9dBm   -0,5dBm
Cisco   X2-10GB-ER   SC   SM   1550nm   40km   -4,7dBm   4,0dBm   -15,8dBm   11,1dBm   19,8dBm   -1dBm
Cisco   X2-10GB-SR   SC   MM   850nm   26-400m   -7.3dBm   -1,2dBm   -9,9dBm   2,6dBm   8,7dBm   -1dBm
Cisco   SFP-10G-LR   LC   SM   1310nm   10km   -8,2dBm   -0,5dBm   -14,4dBm   6,2dBm   13,9dBm   -0,5dBm
Cisco   SFP-10G-ER   LC   SM   1550nm   40km   -4,7dBm   4,0dBm   -15,8dBm   11,1dBm   19,8dBm   -1dBm
Cisco   SFP-10G-ZR   LC   SM   1550nm   80km   0dBm   4dBm   -24dBm   20dBm   24dBm   -7dBm
Cisco   CWDM-SFP10G-xxxx= (SFP+)   LC   SM   1470-1610nm      0dBm   5dBm   -16dBm   16dBm   21dBm   -1dBm
Cisco   2955-100BASE-LX   SC   SN   1310nm   15km   -15 dBm   -8dBm   -31dBm   16dBm   23dBm   
Milan   MIL-C2413   SC   MM   1310nm   2km   -15dBm      -31dBm   16dBm      
Milan   MIL-C2413-15   SC   SM   1310nm   15km   -8dBm      -31dBm   23dBm      
MRV   EM316F/S1   SC   SM   1310nm   35km            17dBm      
Transmode   7500   SC   MM   850nm      -10dBm   -4dBm   -17dBm   7dBm   13dBm   -3dBm
Transmode   7500   SC   SM   1310nm      -11dBm   -3dBm   -20dBm   8dBm   17dBm   
Transmode   7500   SC   SM   1470-1610nm   80km                  
Transmode   7600   SC   SM   1310nm      -11dBm   -3dBm   -17dBm   6dBm   14dBm   -3dBm
Transmode   7600   SC   SM   1470-1610nm      -2dBm   3dBm   -18dBm   16dBm   21dBm   -3dBm
Logged

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2901
    • View Profile
    • NeDi
Re: DOM values
« Reply #1 on: October 11, 2019, 10:06:26 am »
Yes, by adding the different types (as reported by switch) and thresholds to nedi.conf:

dom-alert   CCM-1241   3   -10   3   -12   default-settings
Logged
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

swepart

  • Newbie
  • *
  • Posts: 44
    • View Profile
Re: DOM values
« Reply #2 on: October 16, 2019, 09:50:23 am »
:)  Should have looked in the conf file
Logged

Saguu

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: DOM values
« Reply #3 on: October 17, 2019, 03:49:50 pm »
Hello,

Quick question : I would like to add the different type of SFP I have in my network.
Here is the information in my nedi.conf :

# Digital Optical Monitoring using type of transceiver to set transceiver based alert thresholds.
# Values within 3dBm generate warnings. The signal levels are stored in the transceiver's module
# entry (RX=FW,TX=SW) and set its status accordingly.
#
#      type      TX-hi   TX-lo   RX-hi   RX-lo   description (replaces module description)
;dom-alert   default      3   -10   3   -12   default-settings
dom-alert   GLC-SX-MMD    -3   -9.5   0   -17
dom-alert    GLC-LH-SMD   -3   -9.5   -3   -19
dom-alert   SFP-10G-LR   -0.5   -8.2   -0.5   -14.4
;dom-alert    1000BaseSX   -3    -9.5    0    -17

I do not understand why I have a warning ?



Thank you
Logged

Saguu

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: DOM values
« Reply #4 on: November 04, 2019, 10:18:40 pm »
Any idea ?
Logged

Saguu

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: DOM values
« Reply #5 on: November 20, 2019, 08:54:40 pm »
Bump ! :D
Logged

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2901
    • View Profile
    • NeDi
Re: DOM values
« Reply #6 on: December 03, 2019, 10:07:37 am »
Sorry, for the delay :)

If a value is within 3dbm (RX) or 1dbm (TX) of the threshold, a warning state is issued. You can adapt nedi.conf, if you want to get rid of them (or modify $wt in the CheckOptic() function in libmisc.pm).
Logged
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

Saguu

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: DOM values
« Reply #7 on: December 17, 2019, 09:22:17 pm »
Works fine !

Many thanks :)
Logged

Reygan

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: DOM values
« Reply #8 on: May 22, 2020, 10:32:55 am »
I have cisco WS-C3850-12S-E

show interface transceiver details showing me such table:

             Optical            High Alarm  High Warn  Low Warn   Low Alarm
             Transmit Power     Threshold   Threshold  Threshold  Threshold
Port         (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
---------    -----------------  ----------  ---------  ---------  ---------
Gi1/0/4      -7.0                    2.0       -0.0       -7.9      -10.0
Gi1/0/5      -4.5                   -1.0       -2.9       -7.9      -10.0
Gi1/0/6      -7.4                   -1.0       -1.9      -10.5      -11.4
Gi1/0/7      -6.7                    2.0       -0.0       -7.9      -10.0
Gi1/0/9      -5.4                    2.0       -0.0       -7.9      -10.0

             Optical            High Alarm  High Warn  Low Warn   Low Alarm
             Receive Power      Threshold   Threshold  Threshold  Threshold
Port         (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
---------    -----------------  ----------  ---------  ---------  ---------
Gi1/0/4     -10.0                    2.0       -0.0      -27.9      -30.0
Gi1/0/5     -10.5                   -0.0       -1.9      -20.0      -22.0
Gi1/0/6      -6.2                   -1.9       -2.9      -20.0      -21.0
Gi1/0/7     -21.3                    2.0       -0.0      -27.9      -30.0
Gi1/0/9      -7.1                    2.0       -0.0      -27.9      -30.0


But, in Devices-Status in Modules table i see such:



Could you help me, why these shown values are multiplied by 10, and becuse of these are alerted?
Logged
Daniel V. Lenskiy

Reygan

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: DOM values
« Reply #9 on: May 22, 2020, 02:00:01 pm »
Alright, I solved problem by myself :)
Logged
Daniel V. Lenskiy

Reygan

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: DOM values
« Reply #10 on: May 22, 2020, 02:25:39 pm »
Cause was the wrong configuration. I just used default configuration.

It can be solved using Other-Defgen from Device-Status. Then in Modules section in Optics monitor by changing divide factor I set needed value.
Logged
Daniel V. Lenskiy

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2901
    • View Profile
    • NeDi
Re: DOM values
« Reply #11 on: May 25, 2020, 10:03:12 am »
Thanks for not giving up ;) Feel free to send the .def by clicking on the little mail icon in Defed...
Logged
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

Reygan

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: DOM values
« Reply #12 on: May 25, 2020, 10:32:28 am »
Oh yeah! That OIDs is quiet tough thing!

By the way, where can I download finished .def's for Nedi? I interested especially for defs for some uncommon cisco devices.
Logged
Daniel V. Lenskiy

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2901
    • View Profile
    • NeDi
Re: DOM values
« Reply #13 on: June 18, 2020, 02:00:41 pm »
I plan a new tutorial. You can find all working .defs in the distribution and some additional ones here in the forum...
Logged
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo
Pages: [1]
« previous next »