MACFLOOD Treshold Settings

[tuxfrog]

We have Nedi Version 1.0.9-010 runnning.

In the nedi.conf File i set up a Treshold value for macflooding (100):
# MACs per interface  threshold to detect switch flooding
macflood        100

I set this value after discovering all my switches. First it was set at 50.

If i change this value it has no effect. I look into the DB and the value always stay at 50.
Update to DB get reset to 50 if a new discover runs.

How can i change this value?

[rickli]

Whenever you add a target to monitoring, the values in nedi.conf are taken as default. After that you can set per target thresholds in Monitoring-Setup. Just filter on the devices you want to change, enter any value(s) on the top and click update. This way you can change single devices or apply it to hundreds at the same time...

[tuxfrog]

I gues that it would be under the Monitoring Setup.
But i can not find the field for the mac treshold.
Or is it the Arp Poision Field?

[rickli]

Oops my bad. Forgot to mention that MACflood actually is per interface, thus it's in Devices-Interfaces, but same procedure...

[tuxfrog]

Yes there it is.
Nice...thanx.

[tuxfrog]

Ok...seems not working.

Same thing as updating the macflood value directly at the DB.
Values are there but after next discovery the values where reset to the default value

[rickli]

This is a bug indeed! Will fix it, tx...

[SchmuFoo]

Oops my bad. Forgot to mention that MACflood actually is per interface, thus it's in Devices-Interfaces, but same procedure...

Where can I find it exactly? On Devices-Interfaces.php?

[rickli]

Look for binoculars in the input form. It's the 3rd number field...