Messages

1

Installation / Re: Problems with NeDi 2.3C and PHP 8.0 / 8.1

« on: August 13, 2024, 03:10:33 pm »

Got it, was my mistake.
You have to activate the powertools repository for rocky linux 8 in order to get the correct packages.

Sorry for bothering!

Regards
Christoph

2

Installation / Re: Problems with NeDi 2.3C and PHP 8.0 / 8.1

« on: August 12, 2024, 12:03:32 pm »

Hi Remo.

no, unfortunately I got:

CLI :IO-Pty not available

Seems that something went wrong during installatioon.

3

Installation / Re: Problems with NeDi 2.3C and PHP 8.0 / 8.1

« on: August 06, 2024, 03:05:45 pm »

Hi,

I have a simmilar problem here.
I just setup a new host with Rocky Linux 8 and  with NeDi 2.3C
Running the discovery always comes up with CLI Port 23.
If I doing a:

/var/nedi/nedi.pl -vvvkK -B0 -SAFGgsjmvpadobewitu -a "hostname"

I get the following output in the CLI section:

Prepare (CLI)  ----------------------------------------------------------------  Tue Aug  6 14:47:19 2024
TEL :Connect NeDi_Service@10.11.79.1:23 Tout:2s OS:IOS EN:[\w+().-]+#\s?$
TEL :Connect dcnm@10.11.79.1:23 Tout:2s OS:IOS EN:[\w+().-]+#\s?$
EVNT:MOD=B/1 L=150 CL=cfge TGT=c02bhl08u32-rk01 MSG=Config backup error: can't start session

I already tried to set "usessh     always", but that didn't help.

Regards, Christoph

4

Discovery / Re: no interface colors on Device-Status-page

« on: April 21, 2023, 08:50:34 am »

Hi,

I just updated 2.2 and noticed the same issue.
So I tried to copy the "Devices-Status.php" from the 2.1 package to the html sub directory.
This works, and also, it seems to be much faster displaying the interface list.

Regards

5

GUI / Devices-Translator

« on: March 12, 2019, 05:48:28 pm »

Hi,

what is the icon in the "Device Status--Configuration--Devices-Translator" for in NeDi1.7C?
I get an http 404 Not Found error by clicking on.
On the other hand, I miss "view log" that was on that position in former releases.

Regards

Christoph

6

GUI / CLI Send

« on: December 18, 2018, 11:57:45 am »

Hi,

I just installed NeDi 1.7C.
If I create an CLI file in "System File Edit", I expected that it appears at "Device Status" in the drop down box of the CLI line for executing on this device.
But it doesn't. 
Did I missed something here?

Regards

Christoph

7

Definition Files / Re: search def for WS-C2960-8TC-S

« on: July 19, 2011, 12:21:24 pm »

OK, I added the missing lines.
Can you test it in your environment?

Code: [Select]

# Please use for "Type" the exact Cisco Product Name
# Please use "cpmCPUTotal5minRev" for "CPUutl"
# Please make sure that for "Serial" the correct value is shown
# If you create a .def file please send it to "remo.rickli@psi.ch"

# General
SNMPv   2HC
Type    WS-C2960-8TC-S
OS      IOS
Icon    w2bp
Bridge  VLX
Dispro  CDP
Serial  1.3.6.1.2.1.47.1.1.1.1.11.1001
Bimage  1.3.6.1.4.1.9.2.1.73.0

# Vlan Specific
VLnams  1.3.6.1.4.1.9.9.46.1.3.1.1.4.1
VTPdom  1.3.6.1.4.1.9.9.46.1.2.1.1.2.1
VTPmod  1.3.6.1.4.1.9.9.46.1.2.1.1.3.1

# Interfaces
IFalia
IFalix
InBcast 1.3.6.1.2.1.31.1.1.1.3
InDisc  1.3.6.1.4.1.9.2.2.1.1.26
OutDisc 1.3.6.1.4.1.9.2.2.1.1.27
IFvlan  1.3.6.1.4.1.9.9.68.1.2.2.1.2
IFvlix
IFdupl  1.3.6.1.2.1.10.7.2.1.19
IFduix  1.3.6.1.2.1.10.7.2.1.1
Halfdp  2
Fulldp  3

# Modules
Modesc  1.3.6.1.2.1.47.1.1.1.1.2
Moclas  1.3.6.1.2.1.47.1.1.1.1.5
Movalu  9
Moslot  1.3.6.1.2.1.47.1.1.1.1.7
Modhw   1.3.6.1.2.1.47.1.1.1.1.8
Modsw   1.3.6.1.2.1.47.1.1.1.1.9
Modfw   1.3.6.1.2.1.47.1.1.1.1.10
Modser  1.3.6.1.2.1.47.1.1.1.1.11
Momodl  1.3.6.1.2.1.47.1.1.1.1.13

# RRD Graphing
CPUutl  1.3.6.1.4.1.9.9.109.1.1.1.1.8.1
Temp
MemCPU  1.3.6.1.4.1.9.9.48.1.1.1.6.1
MemIO   1.3.6.1.4.1.9.9.48.1.1.1.6.2


Regards
Christoph

8

Definition Files / Re: search def for WS-C2960-8TC-S

« on: July 13, 2011, 02:32:01 pm »

You mean the "Use of uninitialized value...." stuff?
This is not unusual in 1.0.6 .
How is the object looking like in the GUI?
Is all needed data collected?

9

Definition Files / Re: search def for WS-C2960-8TC-S

« on: July 11, 2011, 04:40:28 pm »

Hi,

you are talking about that box with the lanlite image?
I just modified an old 2960 def and get it working quite well.

1.3.6.1.4.1.9.1.1006.def

Code: [Select]

# General
SNMPv   2HC
Type    WS-C2960-8TC-S
OS      IOS
Icon    w2bp
Bridge  VLX
Dispro  CDP
Serial  1.3.6.1.2.1.47.1.1.1.1.11.1001
Bimage  1.3.6.1.4.1.9.2.1.73.0

# Vlan Specific
VLnams  1.3.6.1.4.1.9.9.46.1.3.1.1.4.1
VTPdom  1.3.6.1.4.1.9.9.46.1.2.1.1.2.1
VTPmod  1.3.6.1.4.1.9.9.46.1.2.1.1.3.1

# Interfaces
IFalia
IFalix
IFvlan  1.3.6.1.4.1.9.9.68.1.2.2.1.2
IFvlix
IFdupl  1.3.6.1.2.1.10.7.2.1.19
IFduix  1.3.6.1.2.1.10.7.2.1.1
Halfdp  2
Fulldp  3

# Modules
Modesc  1.3.6.1.2.1.47.1.1.1.1.2
Moclas  1.3.6.1.2.1.47.1.1.1.1.5
Movalu  9
Moslot  1.3.6.1.2.1.47.1.1.1.1.7
Modhw   1.3.6.1.2.1.47.1.1.1.1.8
Modsw   1.3.6.1.2.1.47.1.1.1.1.9
Modfw   1.3.6.1.2.1.47.1.1.1.1.10
Modser  1.3.6.1.2.1.47.1.1.1.1.11
Momodl  1.3.6.1.2.1.47.1.1.1.1.13

# RRD Graphing
CPUutl  1.3.6.1.4.1.9.9.109.1.1.1.1.8.1
Temp
MemCPU  1.3.6.1.4.1.9.9.48.1.1.1.6.1
MemIO   1.3.6.1.4.1.9.9.48.1.1.1.6.2


Cheers
Christoph