Messages

1

Discovery / Bug in 2.2 ?

« on: April 29, 2023, 01:33:37 am »

after updating from 2.1 to 2.2 the POE values ​​end up on the wrong interfaces, in discovery the correct interface is identified, so also in the "connection box", but in the interface list it is completely wrong.
I am using the same definition file in both versions and I messed around with ifnx and different POE mibs without luck

For now I have only seen it on IOS-XE based switches like Cisco 9200,9300

NeDi environment
Ubuntu 20.04
MariaDB 10.3.38
Nginx 1.18.0
PHP 7.4.3
NET-SNMP 5.8


See screencopies  below

2

General Topics / Re: Remo, are you okay?

« on: January 02, 2022, 02:12:46 am »

Remo seems to be okey,  got info from a guy who talked with him (phone) 3-4 weeks ago

3

General Topics / Re: How to backup Cisco router 851w

« on: December 31, 2021, 04:06:14 am »

I have several Cisco 8xx-series and do backup without any problems.    You should check if you have a def-file for that particular model (851)  if not copy a def-file from some other 8xx and save with correct "sysobid".def

4

General Topics / Re: Remo, are you okay?

« on: December 31, 2021, 03:57:14 am »

I am also concerned about his wellbeing,   Today sent emails to most the Goldpartners and asked them for any info about him.
As of now it is what it is and its working (some bugs) but if we want it to develop and expand we need someone who is taking the lead and maintain this great tool.

I hope that Remo is okey and will come back soon

5

Discovery / Interface name

« on: April 03, 2021, 03:19:02 am »

Nedi 2.x


I have encountered alot of devices (100+)  where the length of the "interface name" is longer than Nedi allows.
Mostly I see it in Cisco ASA,   FortiGate, and in Cisco UCS devices.

When I try to add devices with "to long interface names"  it fails.
 
that means that I cannot use NeDi for any kind of device that have to long "InterFace name",  this is a major problem.

mabe this is this easily solved by changing the varchar(32) in every table  to varchar(64) ?

6

Installation / PHP 7

« on: February 22, 2020, 12:32:03 am »

Do I need php version 7 for Nedi 1.8 ?

7

News / Re: Suggestion

« on: December 10, 2019, 06:56:39 am »

Tnx
Thats really something I am looking forward to.

8

Other / Re: Asset suggestion

« on: November 10, 2019, 12:28:21 am »

I think the Asset module is one of the most important modules in Nedi,  at least if you are running a business where you need to have check and balance.   I have done a script where I automatically update assets with purchase cost and service/support cost.   

I have done some standard reports in a open source tool called "Reportico", in that tool its very easy to make nice reports for everyone who need them.. just point and click.  That tool have saved me a ton of work, now everyone who want a report just go to website and "Point & click"     

http://www.reportico.org/site2/index.php

9

Discovery / Skip options

« on: November 09, 2019, 02:04:28 am »

Is there any doc for the "skip options"  in the discovery process ?


# s=sys       v=vlan      V=vltag            m=modules    g=devrrd        A=arp   F=fwd
# p=dprot      j=adr      i=IFinf           c=IFcomment    u=spd/dup   t=trf    e=err    
# d=discard    b=broadcast   w=poe            a=adm       o=opr       f=ftpcfg    W=web    
# l=APloc      G=toprrd           M=MAClink   P=policy-action  X=existing dev (except -A)      
# retire: N=nodes, T=IF/IPtrack D=dns I=IPs L=links

10

Other / monitoring multiple functions

« on: October 20, 2019, 12:48:41 am »

I have tried to setup multiple monitors on the same device, ex snmp test, ping test, http test.   It seems like Nedi only allow one functional test per device,, is that correct or am I doing something wrong ?

11

Installation / Re: DOM values

« on: October 16, 2019, 09:50:23 am »

  Should have looked in the conf file

12

Other / Asset suggestion

« on: October 05, 2019, 01:55:48 am »

In the asset module. 
- Add field/column for number of depreciation months
- Add automated calculated field/column for monthly depreciation cost = purchase cost/depreciation months
- Add automated calculated field/column for remaining depreciation cost = Purchase cost - (nr of months since purchase*monthly depreciation cost)

13

Installation / DOM values

« on: September 14, 2019, 11:57:29 pm »

Every type of fiber interface have there dampening values..   Can we handle different type of SFPs with correct values


Vendor   Model   Type   Fibertype   Wave   Distance   Min Tx   Max Tx   Känslighet   Min budg   Max budg   Max Rx
Canary   CFT-2061   SC   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CCM-1241   SC   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CFT-2062   ST   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CCM-1242   ST   MM   1310nm   2km   -20dBm   -14dBm   -31dBm   11dBm   17dBm   -8dBm
Canary   CFT-2061-SM   SC   SM   1310nm   30km   -15dBm   -8dBm   -34dBm   19dBm   26dBm   -7dBm
Canary   CFT-2062-SM   ST   SM   1310nm   30km   -15dBm   -8dBm   -34dBm   19dBm   26dBm   -7dBm
Canary   CFT-2081-SM   SC   SM   1310nm   18km   -16dBm   -9dBm   -34dBm   18dBm   25dBm   -7dBm
Cisco   WS-G5484   SC   MM   850nm   550m   -9,5dBm   -3dBm   -17dBm   7,5dBm   14dBm   0dBm
Cisco   WS-G5486   SC   SM   1310nm   10km   -9,5dBm   -3dBm   -19dBm   9,5dBm   16dBm   -3dBm
Cisco   WS-G5487   SC   SM   1550nm   70-100km   0dBm   5dBm   -23dBm   23dBm   28dBm   -3dBm
Cisco   CWDM-1550   SC   SM   1550nm      1dBm   5dBm            
Cisco   GLC-SX-MM   LC   MM   850nm   550m   -9,5dBm   -3dBm   -17dBm   7,5dBm   14dBm   0dBm
Cisco   GLC-LH-SM   LC   SM   1310nm   10km   -9,5dBm   -3dBm   -19dBm   9,5dBm   16dBm   -3dBm
Cisco   GLC-LX-SM   LC   SM   1310nm   10km   -11dBm   -3dBm   -19dBm   8dBm   16dBm   -3dBm
Cisco   GLC-EX-SM   LC   SM   1310nm   40km   -1 dBm   3dBm   -22dBm   21dBm   25dBm   +1dBm
Cisco   GLC-ZX-SM   LC   SM   1550nm   70-100km   0dBm   5dBm   -23dBm   23dBm   28dBm   -3dBm
Cisco   SFP-GE-L   LC   SM   1300nm   10km   -9,5dBm   -3dBm   -20dBm   11,5dBm   16dBm   -3dBm
Cisco   X2-10GB-LR   SC   SM   1310nm   10km   -8,2dBm   -0,5dBm   -14,4dBm   6,2dBm   13,9dBm   -0,5dBm
Cisco   X2-10GB-ER   SC   SM   1550nm   40km   -4,7dBm   4,0dBm   -15,8dBm   11,1dBm   19,8dBm   -1dBm
Cisco   X2-10GB-SR   SC   MM   850nm   26-400m   -7.3dBm   -1,2dBm   -9,9dBm   2,6dBm   8,7dBm   -1dBm
Cisco   SFP-10G-LR   LC   SM   1310nm   10km   -8,2dBm   -0,5dBm   -14,4dBm   6,2dBm   13,9dBm   -0,5dBm
Cisco   SFP-10G-ER   LC   SM   1550nm   40km   -4,7dBm   4,0dBm   -15,8dBm   11,1dBm   19,8dBm   -1dBm
Cisco   SFP-10G-ZR   LC   SM   1550nm   80km   0dBm   4dBm   -24dBm   20dBm   24dBm   -7dBm
Cisco   CWDM-SFP10G-xxxx= (SFP+)   LC   SM   1470-1610nm      0dBm   5dBm   -16dBm   16dBm   21dBm   -1dBm
Cisco   2955-100BASE-LX   SC   SN   1310nm   15km   -15 dBm   -8dBm   -31dBm   16dBm   23dBm   
Milan   MIL-C2413   SC   MM   1310nm   2km   -15dBm      -31dBm   16dBm      
Milan   MIL-C2413-15   SC   SM   1310nm   15km   -8dBm      -31dBm   23dBm      
MRV   EM316F/S1   SC   SM   1310nm   35km            17dBm      
Transmode   7500   SC   MM   850nm      -10dBm   -4dBm   -17dBm   7dBm   13dBm   -3dBm
Transmode   7500   SC   SM   1310nm      -11dBm   -3dBm   -20dBm   8dBm   17dBm   
Transmode   7500   SC   SM   1470-1610nm   80km                  
Transmode   7600   SC   SM   1310nm      -11dBm   -3dBm   -17dBm   6dBm   14dBm   -3dBm
Transmode   7600   SC   SM   1470-1610nm      -2dBm   3dBm   -18dBm   16dBm   21dBm   -3dBm

14

Installation / Re: Nedi 1.9

« on: September 07, 2019, 02:39:50 am »

Tnx,, that solved that issue.

15

Installation / Nedi 1.9

« on: September 03, 2019, 10:37:05 pm »

Have tested 1.9 on a small scale and found something that might be a bug or some misconfiguration of my php

when running "noodle"  I get back data that is correct but this  at the same time I get this messages.

nodarp: Illegal mix of collations for operation 'concat'
nodnd: Illegal mix of collations for operation 'concat'
dns: Illegal mix of collations (utf8_general_ci,COERCIBLE) and (latin1_swedish_ci,IMPLICIT) for operation 'concat'
iptrack: Illegal mix of collations for operation 'concat'

I am using
Centos 7
PHP ver 7.2.21
Mariadb mysql  Ver 15.1 Distrib 5.5.60-MariaDB
Apache 2.4.6

/swepart