Welcome, Guest. Please login or register.

Author Topic: Problem discovery Switch Huawei  (Read 397 times)

marco.mereu

  • Newbie
  • *
  • Posts: 10
    • View Profile
Problem discovery Switch Huawei
« on: June 27, 2017, 02:34:00 PM »
Hi, I have a problem with Huawei switches.
After the discovery the description name does not match.
If you look at the attached image you will see that the first line is InLoopBack0.
In truth this is not so, it should be the interface Gi0 / 0/1 not the InLoopBack0.
In the configuration of the switch I look like this:
#
Interface GigabitEthernet0 / 0/1
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/2
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/3
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/4
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/5
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/6
 Port default vlan 3
#
Interface GigabitEthernet0 / 0/7
 Port default vlan 12
#
Interface GigabitEthernet0 / 0/8
 Port default vlan 12
#
Interface GigabitEthernet0 / 0/9
 Port default vlan 12
#
Interface GigabitEthernet0 / 0/10
 Port default vlan 12
#
Interface GigabitEthernet0 / 0/11
 Port default vlan 12
#


how can I solve this problem ???
TK

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2558
    • View Profile
    • NeDi
Re: Problem discovery Switch Huawei
« Reply #1 on: June 28, 2017, 03:20:20 PM »
Looks like the PVID is not indexed to the correct if-indexes. You can define a PVID Index in Defgen to have it mapped correctly.

I don't know the correct OID for Huawei, but it should be documented somewhere in their MIBs. Perhaps it's somewhere near 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo