Welcome, Guest. Please login or register.

Author Topic: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038  (Read 4336 times)

dobst

  • Full Member
  • ***
  • Posts: 153
    • View Profile
N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« on: March 02, 2015, 02:50:23 PM »
Fixed Temperature OID

Code: [Select]
# Definition for 1.3.6.1.4.1.9.12.3.1.3.1038 created by Defgen 1.8 on 2.Mar 2015 (admobst)
 
# General
SNMPv 2HC
Type N5K-C5596UP
Typoid
Sysdes
OS NXOS
Icon w3bd
Size 2
Bridge VXP
ArpND phy
Dispro CDP
Serial 1.3.6.1.2.1.47.1.1.1.1.11.10
Bimage 1.3.6.1.2.1.47.1.1.1.1.9.22
CfgChg 1.3.6.1.4.1.9.9.43.1.1.1.0
CfgWrt 1.3.6.1.4.1.9.9.43.1.1.3.0
VLnams 1.3.6.1.4.1.9.9.46.1.3.1.1.4
VLnamx
Group
Mode
 
# Interfaces
StartX
EndX
IFname 1.3.6.1.2.1.31.1.1.1.1
IFaddr adr
IFalia 1.3.6.1.2.1.31.1.1.1.18
IFalix
InBcast 1.3.6.1.2.1.31.1.1.1.9
InDisc 1.3.6.1.2.1.2.2.1.13
OutDisc 1.3.6.1.2.1.2.2.1.19
IFvlan 1.3.6.1.4.1.9.9.68.1.2.2.1.2
IFvlix
IFpowr
IFpwix
IFdupl 1.3.6.1.2.1.10.7.2.1.19
IFduix
Halfdp 2
Fulldp 3
 
# Modules
Modesc 1.3.6.1.2.1.47.1.1.1.1.2
Moclas 1.3.6.1.2.1.47.1.1.1.1.5
Movalu 3|6|9|10
Moslot 1.3.6.1.2.1.47.1.1.1.1.7
Modhw 1.3.6.1.2.1.47.1.1.1.1.8
Modsw 1.3.6.1.2.1.47.1.1.1.1.10
Modfw 1.3.6.1.2.1.47.1.1.1.1.9
Modser 1.3.6.1.2.1.47.1.1.1.1.11
Momodl 1.3.6.1.2.1.47.1.1.1.1.13
 
# RRD Graphing
CPUutl 1.3.6.1.4.1.9.9.109.1.1.1.1.8.1
Temp 1.3.6.1.4.1.9.9.91.1.1.1.1.4N
MemCPU 1.3.6.1.4.1.9.9.305.1.1.2.0 -%
Custom

dobst

  • Full Member
  • ***
  • Posts: 153
    • View Profile
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #1 on: March 19, 2015, 01:38:42 PM »
Fixed getting Forwarding Table (= vlan indexed).

Code: [Select]
# Definition for 1.3.6.1.4.1.9.12.3.1.3.1038 created by Defgen 1.8 on 19.Mar 2015 (admobst)
 
# General
SNMPv 2HC
Type N5K-C5596UP
Typoid
Sysdes
OS NXOS
Icon w3bd
Size 2
Bridge VLX
ArpND phy
Dispro CDP
Serial 1.3.6.1.2.1.47.1.1.1.1.11.10
Bimage 1.3.6.1.2.1.47.1.1.1.1.9.22
CfgChg 1.3.6.1.4.1.9.9.43.1.1.1.0
CfgWrt 1.3.6.1.4.1.9.9.43.1.1.3.0
VLnams 1.3.6.1.4.1.9.9.46.1.3.1.1.4
VLnamx
Group
Mode
 
# Interfaces
StartX
EndX
IFname 1.3.6.1.2.1.31.1.1.1.1
IFaddr adr
IFalia 1.3.6.1.2.1.31.1.1.1.18
IFalix
InBcast 1.3.6.1.2.1.31.1.1.1.9
InDisc 1.3.6.1.2.1.2.2.1.13
OutDisc 1.3.6.1.2.1.2.2.1.19
IFvlan 1.3.6.1.4.1.9.9.68.1.2.2.1.2
IFvlix
IFpowr
IFpwix
IFdupl 1.3.6.1.2.1.10.7.2.1.19
IFduix
Halfdp 2
Fulldp 3
 
# Modules
Modesc 1.3.6.1.2.1.47.1.1.1.1.2
Moclas 1.3.6.1.2.1.47.1.1.1.1.5
Movalu 3|6|9|10
Moslot 1.3.6.1.2.1.47.1.1.1.1.7
Modhw 1.3.6.1.2.1.47.1.1.1.1.8
Modsw 1.3.6.1.2.1.47.1.1.1.1.10
Modfw 1.3.6.1.2.1.47.1.1.1.1.9
Modser 1.3.6.1.2.1.47.1.1.1.1.11
Momodl 1.3.6.1.2.1.47.1.1.1.1.13
 
# RRD Graphing
CPUutl 1.3.6.1.4.1.9.9.109.1.1.1.1.8.1
Temp 1.3.6.1.4.1.9.9.91.1.1.1.1.4N
MemCPU 1.3.6.1.4.1.9.9.305.1.1.2.0 -%
Custom

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2780
    • View Profile
    • NeDi
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #2 on: March 27, 2015, 01:46:08 PM »
N5K behaves slightly different. They don't use vlan indexing (so I thought) for the port-index. Thus I've added the VXP method. That didn't work for your device? What NXOS version do you use?
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

dobst

  • Full Member
  • ***
  • Posts: 153
    • View Profile
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #3 on: March 31, 2015, 02:44:32 PM »
VXP does not work for our devices, that's why I use VLX.

From CLI of Switch:
Code: [Select]
Hardware
  cisco Nexus 5596 Chassis ("O2 48X10GE/Modular Supervisor")

  kickstart: version 7.1(0)N1(1a)
  system:    version 7.1(0)N1(1a)

I tested with different definitions:
./nedi.pl -v -SsmgapoWjitedbwAO -t [IP]
Bridge   VLX --> FWDS:580 bridge forwarding entries found
Bridge   VXP --> FWDS:0 bridge forwarding entries found

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2780
    • View Profile
    • NeDi
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #4 on: April 01, 2015, 09:35:25 AM »
Amazing, they must have changed it...tx for the info!
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

73c75q

  • Guest
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #5 on: April 30, 2015, 12:25:30 PM »
hi, we have a few nx5k, running 5.2(1)N1(4)

nedi reports: FWDS:0 bridge forwarding entries found

I've tried VXP and VLX, same result.

here is some of the output:

FWDS:0080ee25e4aa no IFindex for fwd-port 3458
FWDS:001a646d0eaa no IFindex for fwd-port 3585
FWDS:8478ac56fcaa no IFindex for fwd-port 0
FWDS:e41f13250faa no IFindex for fwd-port 0 F
SNMP:Connect 10.1.1.1 user v3 Tout:10s MaxMS:1472 Retry:1 NB:0 FWDS:Walking BridgeFwd (user@177)
FWDS:005056a240aa no IFindex for fwd-port 0
FWDS:005056a223aa no IFindex for fwd-port 5103
...
...
ERR :Fp208 The requested table is empty or does not exist SNMP:Connect 10.1.1.1 user v3 Tout:10s MaxMS:1472 Retry:1 NB:0 FWDS:Walking BridgeFwd (user@186) ERR :Fp186 The requested table is empty or does not exist

any hints?

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2780
    • View Profile
    • NeDi
Re: N5K-C5596UP, 1.3.6.1.4.1.9.12.3.1.3.1038
« Reply #6 on: May 02, 2015, 11:07:54 AM »
I've just tested a N5K-C5596UP running 6.0(2)N2(4) and it works fine with VXP. Then N5K-C5010P-BF and N5K-C5020P-BF running 5.2(1)N1(7) seems to work with VXP and VLX (the latter taking 10s longer). To find out whether VXP works or not try this:

snmpwalk -On -v2c -c comm ip 1.3.6.1.2.1.17.1.4.1.2

vs

snmpwalk -On -v2c -c comm@vlan ip 1.3.6.1.2.1.17.1.4.1.2

If the walk without vlan indexing returns all interfaces you can use VXP instead of VLX. If neither works, you may have another issue. This empty Fp208 error just means, that it hasn't learned any MACs on that vlan...
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo