Welcome, Guest. Please login or register.

Author Topic: Allied Telesis / Telesyn  (Read 2985 times)

meshuggah33

  • Guest
Allied Telesis / Telesyn
« on: May 08, 2013, 10:43:35 AM »
Any Def files for these switches? I have some 9000/24 and 8000S and they only show interface number and description, no speed, duplex, no nothing.

Thank you

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2697
    • View Profile
    • NeDi
Re: Allied Telesis / Telesyn
« Reply #1 on: May 08, 2013, 07:10:21 PM »
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

lorenzo

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Allied Telesis / Telesyn
« Reply #2 on: July 02, 2013, 08:34:37 AM »
I got some AT - 8000S
I created this .def file: it's incomplete but it give you some data.
AT8000S need to be updated to some recent (!!!??!!) firmware to activate the LLDP discovery protocol: all the ours was old and didn't support discovery until we didn't update them.

# Definition for 1.3.6.1.4.1.207.1.4.128 created by Defgen 1.8 on 2.Jul 2013 (xxxx)

# General
SNMPv   2
Type   AT-8000S 48port
Typoid   
Sysdes   1.3.6.1.2.1.1.1.0
OS   other
Icon   w2yd
Size   1
Bridge   normal
ArpND   oldphy
Dispro   LLDP
Serial   1.3.6.1.2.1.17.1.1.0
Bimage   

# Vlan Specific
VLnams   
VLnamx   
Group   
Mode   

# Interfaces
StartX   
EndX   
IFname   1.3.6.1.2.1.31.1.1.1.1
IFaddr   oldadr
IFalia   1.3.6.1.2.1.31.1.1.1.18
IFalix   
InBcast   
InDisc   1.3.6.1.2.1.2.2.1.13
OutDisc   1.3.6.1.2.1.2.2.1.19
IFvlan   1.3.6.1.2.1.17.7.1.4.5.1.1
IFvlix   
IFpowr      
IFpwix   
IFdupl   1.3.6.1.2.1.10.7.2.1.19
IFduix   1.3.6.1.2.1.10.7.2.1.1
Halfdp   2
Fulldp   3

# Modules
Modesc   1.3.6.1.2.1.47.1.1.1.1.2
Moclas   1.3.6.1.2.1.47.1.1.1.1.5
Movalu   9
Moslot   1.3.6.1.2.1.47.1.1.1.1.7
Modhw   
Modsw   1.3.6.1.2.1.47.1.1.1.1.9
Modfw   1.3.6.1.2.1.47.1.1.1.1.10
Modser   
Momodl   

# RRD Graphing
CPUutl   
Temp      
MemCPU      
Custom      

meshuggah33

  • Guest
Re: Allied Telesis / Telesyn
« Reply #3 on: July 02, 2013, 01:55:52 PM »
Thank you very much, what's the cmd to enable lldp after the update?


lorenzo

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Allied Telesis / Telesyn
« Reply #4 on: July 09, 2013, 08:43:25 AM »
you see a new LLDP part into web interface