Welcome, Guest. Please login or register.

Author Topic: No Alias/Interface Description for Cisco device type WS-C2960G-48TC-L  (Read 3848 times)

Peter@Lichtenberg

  • Newbie
  • *
  • Posts: 20
    • View Profile
Hello,

with NeDi V1.08 with some patches I have with cisco device type WS-C2960G-48TC-L problems to display the interface description. At NeDi Device Definition Generator I walk over the interface descriptions with OID 1.3.6.1.2.1.31.1.1.1.18 or without OID and I can read the Alias. But when I start nedi.pl -v -t/a <deviceIP> the table column for Alias is empty. At Device Status page the Info column there are no Alias/Interface Description but CDP: <CDPdevice>.  Any hints what is going wrong here?

Peter

PS: Manual-Discovery (1.0.7) with 1 seed ... it is the previous version number of NeDi

$ sudo -u www-data /var/nedi/nedi.pl -v -t <deviceIP>
PTY :Loaded
LWP :Loaded
OUI :19777 NIC vendor entries read
RDEV:429 devices read from nedi.devices
RADDR:16174 MAC & 752 IP addresses read.
RLNK:2 links (WHERE linktype = "STAT") read from nedi.links
RUSR:4 entries (groups & 8 AND (phone != "" OR email != "")) read from nedi.users
SEED:<deviceIP> added for discovery
MAIN:1 thread, 1st from Thu Mar 15 13:15:01 2012 seems ok adding this one
UPDT:system SET value=value+1 WHERE name="threads"

Manual-Discovery (1.0.7) with 1 seed at Thu Mar 15 13:53:49 2012
-------------------------------------------------------------------------------
Device            Status            Todo/Done-Time
===============================================================================

Discover     ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Identify     ------------------------------------------------------------------
SNMP:Connect <deviceIP> <public> v2 Tout:25s MaxMS:1472
IDNT:Name = <switch>
SOBJ:Reading 1.3.6.1.4.1.9.1.697.def
SYS :Con= Loc=<location>
SYS :OS=IOS SV=6 TY=WS-C2960G-48TC-L
DISC:no skipif policy using -S ()

Enterprise   ------------------------------------------------------------------
SNMP:Connect <deviceIP> <public> v2 Tout:25s MaxMS:1472
SERN:Serial number = <deviceSN>
BOOT:Image = c2960-lanbasek9-mz.122-58.SE2.bin
VTP :Domain = <vtpdomain>
VTP :Mode = 1
VLAN:
...
CPU :Utilization = 9%
MEM :Available memory 3706668 Bytes

Interfaces   ------------------------------------------------------------------
RIF :50 IF read (WHERE device = "<devicename>") from nedi.interfaces
SNMP:Connect <deviceIP> <public> v2 Tout:30s MaxMS:2048
IF  :Walking 64bit counters
IF  :Walking errors
IF  :Walking in-broadcasts
IF  :Walking in-discards
IF  :Walking out-discards
IF  :Walking info
IF  :Index Name         Spd Dup St Pvid Description      Alias            PoE
IF  :10147 Gi0/47     1000M  FD  3    0 GigabitEthernet0                   0W
IF  :10501 Nu0       10000M  -   3    0 Null0                              0W
IF  :10123 Gi0/23       10M  ?   1    1 GigabitEthernet0                   0W
IF  :10108 Gi0/8        10M  ?   1    1 GigabitEthernet0                   0W
IF  :10126 Gi0/26       10M  ?   1    1 GigabitEthernet0                   0W

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2785
    • View Profile
    • NeDi
Compare to defs of similar switches. There should be a IFalix entry to index back to the IFMIB...
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo

Peter@Lichtenberg

  • Newbie
  • *
  • Posts: 20
    • View Profile
Hello Remo,

the problem is solved now.

Thanks for the hint.

 Peter