Welcome, Guest. Please login or register.

Author Topic: problem with backup conf  (Read 1640 times)

richard.lajaunie

  • Newbie
  • *
  • Posts: 26
    • View Profile
problem with backup conf
« on: March 14, 2012, 05:35:13 PM »
Hello,
I'm still testinf nedi 1.0.7 and i have some problems.

My network ingineer ask me to backup conf every 2 hour (we have about 160 switches and routers).
Each time i ran nedi.pl -pobv or nedi.pl -poBv  there is always one or more switches which backup is not complete.
????

Here some parts of nedi output:

Code: [Select]
#20120314:1517 start # ./nedi.pl -pobv
Started with relative path!
PTY :Loaded
LWP :Loaded
OUI :19777 NIC vendor entries read
RDEV:270 devices read from nedi.devices
RADDR:6744 MAC & 570 IP addresses read.
RLNK:0 links (WHERE linktype = "STAT") read from nedi.links
RUSR:6 entries (groups & 8 AND (phone != "" OR email != "")) read from nedi.users

... / ...

Discover     ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Identify     ------------------------------------------------------------------
SNMP:Connect 172.xx.xxx.x community v2 Tout:5s MaxMS:1472
IDNT:Name = SWNAME
SYS :Con= Loc=XXXX;YYYY;VVVV;ZZZZ
SYS :OS=IOS SV=78 TY=SW-C6509-VSS-IOS
DISC:no skipif policy using -S ()

... / ...

Config (CLI)   ----------------------------------------------------------------
SSH :nedi:22 Tout:5s OS:IOS EN:(.+?)#\s?$
PTY :Forking ssh -o 'StrictHostKeyChecking no' -l nedi 172.17.105.1
CLI2:Matched Password:, sending password
CLI3:Password sent
CLI8:Matched enable prompt, OK
CMD :terminal length 0:
CMD :show run
WAIT:Building configuration...
WAIT:
CONF:Current configuration : 89233 bytes
CONF:
... / ...
CONF:interface Port-channel360
CONF:1024 lines read
WCFG:Config changed by 80470 characters:
1025-  description ### xxxxxxxxxxxxxxxxx ###
1026-  switchport
... / ...
3473- !
3474-
3475- end


MLQ :admin+ SWNAME: Config changed by 80470 characters:
1025-  description ### ------------------- ###
1026-  switchport
... / ...
3473- !
3474-
3475- end

DevRRD       ------------------------------------------------------------------
... / ...
Config (CLI)   ----------------------------------------------------------------
SSH :nedi:22 Tout:5s OS:IOS EN:(.+?)#\s?$
PTY :Forking ssh -o 'StrictHostKeyChecking no' -l nedi 172.xxx.yyy.zzz
CLI2:Matched Password:, sending password
CLI3:Password sent
CLI8:Matched enable prompt, OK
CMD :terminal length 0:
CMD :show run
WAIT:Building configuration...
WAIT:
CONF:Current configuration : 19172 bytes
... / ...
CONF:!
CONF:interface FastEthernet0/22
CONF:395 lines read
WCFG:Config changed by 11692 characters:
 396-  description ### vers prise ###
...


Thank you for our help.

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2697
    • View Profile
    • NeDi
Re: problem with backup conf
« Reply #1 on: March 14, 2012, 08:36:09 PM »
I don't see an error in your output. Assuming its a bit different every time, have you tried increasing timeout?
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo