Welcome, Guest. Please login or register.

Author Topic: Feature request: Stack monitoring/Error detection.  (Read 2713 times)

kevinava

  • Newbie
  • *
  • Posts: 30
  • - Network Systems Engineer
    • View Profile
    • SNMP Location Generator
Feature request: Stack monitoring/Error detection.
« on: February 07, 2012, 10:53:31 AM »
Hi,
I would love to be able to detect and get alarms for stack switches that gets removed or dies on Cisco devices.

Code: [Select]
IF StackSub-St3-1 went down

IF StackSub-St3-2 went down

If both stacksub interfaces go down, create alarm.
Could also be combined with next line.

Code: [Select]
Module WS-C3750X-24 SN:XXXXXXXXXXX in slot 3 was changed to a WS-C3750X-24 - Provisioned with SN:<< Provisioned SN: field, is now blank.


Code: [Select]
#sh switch
Switch/Stack Mac Address : xxxx.xxxx.xxxx
                                           H/W   Current
Switch#  Role   Mac Address     Priority Version  State
----------------------------------------------------------
*1       Master xxxx.xxxx.xxxx     15     1       Ready
 2       Member xxxx.xxxx.xxxx     1      1       Ready
 3       Member 0000.0000.0000     0      1       Removed

When stacked switch comes back, the following is in Monitoring Events.

Code: [Select]
Module WS-C3750X-24 - Provisioned SN: in slot 3 was changed to a WS-C3750X-24 with SN:XXXXXXXXXXX<< Check Provisioned SN: field, data is filled in.

Cheers,
Kevin
« Last Edit: February 07, 2012, 02:45:57 PM by kevinava »
Best regards,

Kevin A. Vatn
- Network Systems Engineer
SNMP Location Generator - http://snmplg.kvatn.net/