Welcome, Guest. Please login or register.

Author Topic: Error when discovering Cisco WAE device  (Read 2063 times)

coolcat

  • Guest
Error when discovering Cisco WAE device
« on: October 06, 2011, 10:55:30 AM »
Have just installed NeDiO6 and started a discovery.
The discovery is halted with a error on my Cisco WAAS device.
This is working fine with my other NeDi install on 1.0.5.

I did a "test" discovery on only this device to show.

NeDiO:/var/nedi#./nedi.pl -t 10.0.0.52

Discovery (1.0.6 rc1) with 1 seed at Thu Oct  6 18:28:31 2011
-------------------------------------------------------------------------------
Device                          Status                          Todo/Done-Time
===============================================================================
10.0.0.52  vac-wae512-1 IsIiIeIbItImIlUse of uninitialized value $sp in concatenation (.) or string at ./inc/libsnmp.pm line 932.
Use of uninitialized value $sp in string eq at ./inc/libsnmp.pm line 933.
 i1         0/1-0s
===============================================================================
END :Took 0 minutes

NeDiO:/var/nedi#./nedi.pl -vt 10.0.0.52
Started with relative path!
LWP :Loaded
OUI :17516 NIC vendor entries read
RDEV:0 devices read () from nedi.devices
RIF :0 IF read () from nedi.interfaces
RLNK:0 links (WHERE type = "STAT") read from nedi.links
SEED:10.0.0.52 added for testing
MAIN:Ignoring 0 thread for testing

Discovery (1.0.6 rc1) with 1 seed at Thu Oct  6 18:27:26 2011
-------------------------------------------------------------------------------
Device                          Status                          Todo/Done-Time
===============================================================================

Discover     ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Identify     ------------------------------------------------------------------
SNMP:Connect 10.0.0.52 public v2 Tout:2s MaxMS:1472
IDNT:Name = vac-wae512-1
SOBJ:1.3.6.1.4.1.9.1.776.def not found, using other.def
IDNT:New Device with ID testing and IP 10.0.0.52 found
IDNT:SNMP write policy not enabled
SYS :Con= Loc=-;-;-
SYS :OS=other SV=72 TY=-

Enterprise   ------------------------------------------------------------------
SNMP:Connect 10.0.0.52 public v2 Tout:2s MaxMS:1472
SERN:Serial number = n/a

Interfaces   ------------------------------------------------------------------
SNMP:Connect 10.0.0.52 public v2 Tout:7s MaxMS:2048
ERR :Speed The requested table is empty or does not exist
ERR :Inoct The requested table is empty or does not exist
ERR :Out-errors The requested table is empty or does not exist
ERR :In-broadcasts The requested table is empty or does not exist
ERR :IF Type The requested table is empty or does not exist
ERR :IF MAC The requested table is empty or does not exist
ERR :Alias 1.3.6.1.2.1.31.1.1.1.18 The requested table is empty or does not exist
Use of uninitialized value $sp in concatenation (.) or string at ./inc/libsnmp.pm line 932.
Use of uninitialized value $sp in string eq at ./inc/libsnmp.pm line 933.
IF  :    1:Gi2/0        0Mb -  0  Vl0    GigabitEthernet                 0W

IfAddresses  ------------------------------------------------------------------
IFIP:No useip policy set, always using discovered IPs
SNMP:Connect 10.0.0.52 public v2 Tout:2s MaxMS:1472

Prepare (CLI)  ----------------------------------------------------------------
DISC:Cli arp = not implemented

Arp (SNMP)   ------------------------------------------------------------------
SNMP:Connect 10.0.0.52 public v2 Tout:2s MaxMS:1472
ARPS:00000c07ac00=148.138.206.16
ARPS:0025b3e2c9a2=148.138.206.33
ARPS:2 ARP entries found

DevRRD       ------------------------------------------------------------------
DRRD:Testing ./rrd/vac-wae512-1/system.rrd CPU:0 MEM:0 CUS:0 TEMP:0
DRRD:IFName   Inoct    Outoct   Inerr  Outerr Indis  Outdis Inbcst
DRRD:Gi2/0    0        0        0      0      0      0      0
DISC:ToDo/Done-Time =    0/1-0s
===============================================================================
MAIN:1 devices discovered
RNOD:0 nodes read () from nedi.nodes

BuildNod     ------------------------------------------------------------------

RetireNod    ------------------------------------------------------------------
END :Took 0 minutes


Any one that got a way to fix this?

/Pierre

rickli

  • Administrator
  • Hero Member
  • *****
  • Posts: 2728
    • View Profile
    • NeDi
Re: Error when discovering Cisco WAE device
« Reply #1 on: October 06, 2011, 05:49:49 PM »
Please update nedi to the beta or wait  a few more days until I make rc1 available to the public  :)
Please consider Other-Invoices on your NeDi installation for an annual contribution, tx!
-Remo