Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - kamintech

Pages: [1]
1
GUI / Device Write command fails
« on: February 02, 2016, 01:40:48 PM »
I'm running the NeDio 1.4 and I've had this problem for some time but have not been able to determine what or how to correct. Here's my problem, when I go to a device and click on the Device Write icon, it will bring up the Device Write screen but is has this error, "Errors Write /var/nedi/cli/cmd_admin" (see attachment). This fails on both the admin and my user account. What is causing this error and how do I correct it?

2
GUI / Help understanding Topology maps
« on: September 17, 2015, 02:52:35 PM »
Can someone help me understand the network maps feature. On several switches when I show a topology map it will draw a yellow or gold colored oval around two of the devices. I attached a sample. What does this mean? Does it indicate an loop or something?

Thanks for your help...

3
NeDiO / NeDi014 db failed error
« on: March 11, 2015, 02:20:31 PM »
I've been running the NeDi014 version for several weeks and now and really like the improvements that you have made. GREAT JOB!! I have come across an error when I try to add a couple of Cisco AP's 1200 series. I'm using NeDi to add the IP address and it goes through all of the normal steps but fails before it completes with this error. I'm only getting these on 3 Cisco AP's while others are working normally. I also did not have this problem in the NeDio09 version. Hope you can point me in the right direction to resolve this.

Write Nodes -- DBD::mysql::db do failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'to Calcine Scale House,'M',1426079306,'')' at line 1 at /var/nedi/inc/libdb.pm line 1849. DBD::mysql::db do failed:
 

Thanks again for such a great product.
Kenny

4
Discovery / No IP's found on subnet
« on: May 28, 2014, 09:59:51 PM »
We have five different locations each with their own subnet and we are using NeDio8 to monitor the network. The information that it gives us on our switches and what is connected to them is very useful. All of the subnets are reporting devices and their nodes correctly except for one. At this location the devices are correct and they show the nodes that are populated on the switches but all of the node IP addresses report as 0.0.0.0. There may be several Windows computers that display the IP address correctly but for the remainder are zeros. At this location, we only have RO access to the router (managed by someone else) but I do have a Cisco 3550 layer 3 switch. Would it be possible to get the IP information from the switch and if so, how do I do this? I've experimented with Defgen but the result doesn't change.

Thanks for a great product...
 

5
NeDiO / CLI Bridge Fwd error: no working user error
« on: February 19, 2014, 11:45:52 PM »
Remo,
I'm running the new NeDio9 and really like the new look. I have several routers that we are only allowed to have SNMP read access so every time the discovery runs(hourly) I get several messages like this:CLI Bridge Fwd error: no working user. Is there a way the I can have NeDi ignore these devices(non CLI access) but still use CLI on the remainder?

Thanks...

6
Discovery / Keep getting Config changed messages after installing NeDio9
« on: January 24, 2014, 05:49:58 PM »
I've installed NeDio9 and I must say that I like the new look of things. Since the installation though I noticed that every time the hourly cron job runs, I get the following config message on most of all the devices, especially wireless APs. The message reads some like "Config changed (@15631457s) 149.26 days after writing to flash". The number of days varies with device. The cron job is the default: 0 1-23 * * *   /var/nedi/nedi.pl -vp > /tmp/nedi-`date +\%H`.run 2>&1.
Is there a way to turnoff the messages?

Thanks for your help... 

7
NeDiO / unable to connect to NeDio9 using http
« on: January 19, 2014, 09:33:18 PM »
I just downloaded the NeDio9, installed with no problem but I'm unable to connect to NeDio using http or https. I'm able to ping the IP address but NO web  connection. Is there a service that needs to be started? Did I miss something on the installation?

Thanks.....

8
Discovery / switch icon color changed
« on: August 27, 2013, 10:32:50 PM »
I've been running NeDio 8  for several months now and I'm still learning how it all works. We use mostly (95%) Cisco switches and they have always been a blue color. I've had to modify defs on several but overall no problem. Then I started noticing that some were turning a lime green color. I didn't think much about it but now it seems that over half of my switches have turned this lime green. It also seems that the normal hourly scans have stopped and some devices have not been updated in a couple of weeks now. Any ideas on this?? What do the different colors mean and how many different variations are there?

Thanks for a great product....

9
GUI / accidentally deleted admin message
« on: July 26, 2013, 10:59:43 PM »
I accidentally deleted the admin message section on the user profiles. How can I get this back?

10
GUI / Help with Rack map view
« on: July 24, 2013, 09:19:40 PM »
On the defgen video you show a rack map with your network switches. It seems that this is based on the snmp location but I can't seem to hit upon the correct combination. No matter what combination I use my maps are showing in a horizonal format. Do you have any other documentation that would help me to set this up?

Thanks...

11
Other / Help with Monitoring
« on: July 17, 2013, 06:47:48 PM »
For the life of me I can't seem to figure out how to setup monitoring on devices and nodes. I would like to receive an email notification when a device goes down and back up. Also the same for a few nodes that are critical to operations. How do I do this?? Should I use ping or up time and how do I configure the email notification? What is the difference between email and email (repeat)? How often does this repeat sending the email? Any help would be appreciated.

Thanks...

12
Discovery / Nodes are discovered with IP 0.0.0.0
« on: June 04, 2013, 08:23:13 PM »
I'm still a newbie to the NeDi program so my problem may be to my lack of knowledge of how everything works. I've setup my seed devices and it is finding other CDP neighbors correctly and adding them but when a new Node is discovered, it finds the MAC on the correct port but the DNS name and the IP information is not resolved. It comes back as Node 012345689 appeared on Fa0/3 V|1 as - with IP 0.0.0.0, with the exception of my servers and just a few Windows computers. It appears as if the DNS resolution is not working.
I can use the Network Tool box and do a lookup on my ip ranges and it will resolve the names and the IP address information correctly. What am I overlooking? Any help would be appreciated very much.

Pages: [1]