Welcome, Guest. Please login or register.

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - harry

Pages: [1] 2
Definition Files / Dell Def files request
« on: August 14, 2018, 04:08:06 AM »
Hello all,
I am looking for definition files for dell switches. I have different models listed here.
Peale see the attachment for the list.

Thanks a lot in advance.


Other / Netbios name or service.
« on: December 06, 2013, 02:46:02 AM »
Hi Remo,
In Node-list I have never seen my netbios name for  nodes. What would be the settings to get those names populated in to the databse?


General Topics / CSV file data extract.
« on: November 27, 2013, 12:58:58 AM »
Can some one please help me in wrinting  code, for extracting data from follwoing CSV file structure? may be in perl or AWK or any other scripting tool.

The file structure is like,
in a single record 1 to 16 comma seperated filelds are site related information,  from 16, 69 comma seperated values are data and those are in multipule columns to up to end of record. may be 30 to 40 times in to 69 fields.

I could extracet 1 to 16 fields in one line but could not establish any logic for extracting subsequent data of fix column(69) in each new row for multipule time up to the end of each record.

Thanks in advance.


News / NeDi 1.0.9 Beta test
« on: September 02, 2013, 01:27:36 AM »
Hi Remo,
I had working NEDI server I uploaded the beta version and had this error.

PTY :Loaded
PERL:LWP::UserAgent loaded
install_driver(MSQ) failed: Can't locate DBD/MSQ.pm in @INC (@INC contains: /usr/local/libdata/perl5/site_perl/i386-openbsd /usr/libdata/perl5/site_perl/i386-openbsd /usr/local/libdata/perl5/site_perl /usr/libdata/perl5/site_perl /usr/libdata/perl5/i386-openbsd/5.12.2 /usr/local/libdata/perl5/i386-openbsd/5.12.2 /usr/libdata/perl5 /usr/local/libdata/perl5 .) at (eval 31) line 3. Perhaps the DBD::MSQ perl module hasn't been fully installed, or perhaps the capitalisation of 'MSQ' isn't right. Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge, mysql. at /var/nedi/inc/libdb.pm line 36

Any help...? I tried to google this error and it has different solutions for installing a perl module or changing the script for Mysql to mysql.


Definition Files / Support for Dell switch.
« on: August 16, 2013, 02:55:13 AM »
Hi Remo,
Can I request for adding support for DELL switches. I tried to add Force10 switch but not much information I could extract through.

Has anyone tried to add these Dell switches to NEDI?

Is there any one interested in Dell switch to be added to NEDI? Please show your interest here.

Thanks in advance.

Discovery / Nedi-027 RC issue.
« on: January 30, 2013, 10:58:45 PM »
HI All,

I installed  this RC yesterday I have encountered these following issues.

1. Monitoring page Graphs are not showing anything only blank grid canvas.
2.Phones are not appearing in device list.
3. Backup - in Nedi.conf this field is commented so it should try telent and ssh. It is only trying ssh and not telent. so backup fials in case of the devices are only set for telnet.

some query..
1.what is flower or floodlight manager?

1. all aruba Accesspoint can appear as module to the controller. where they are connected, insted of having them listed as seperate device. A hyperlink can be provided for detailed drilling of data for AP.

I have installed new nedi and done Nedi -I to delete my old RRD's. I hope I have not missed any step of installation or config.


WAN/Routing / ISDN monitoring.
« on: January 29, 2013, 11:37:45 PM »
Hello Remo and all.

I wish if we can implimant ISDN Status monitoring. and later on the call count and their graph on Cisco 28xx ,38xx, 29XX.


GUI / RRD Graph Information.
« on: December 13, 2012, 01:27:32 AM »
HI All,
In the Device Graph menu, interface graph for traffic is generated.

I have two query.

1. How can get Average, Max and Min data for that traffic period?
    is there any tool which can generate this data...?
2. Can we request this to Remo to add this in todo list...?
    Is there  anyone who is interested in this requirement? Please Support here.

Thanks in advance for your help.

Installation / 1.08 -309 build issues.
« on: November 06, 2012, 01:15:40 AM »
Hi Remo,
I have Nedio6.iso Cd and I installed on laptop. This was working fine. than I deleted all nedi files(in /var/nedi/ -->   rm -rf) and extracted the 1.08-309 build as (SU www).

I am getting this mysql error while doing perl nedi.pl -i and correct password.( nedi and dbpa55)

 DBI connect('mysql:localhost','nedi',...) failed: Access denied for user 'nedi'@'localhost' to database 'mysql' at /var/nedi/inc/libdb-msq.pm line 34

Have I done any thing wrong?

General Topics / Perl Help for a networking script.
« on: October 11, 2012, 04:52:42 AM »
Hi ,
I am reading a CSV file in perl where date is 10-Oct-12 format, how to convert this date in perl script while reading to "dd/MM/YY format?

I hope some one can help me here.

Tahnks in advance.

Discovery / Config Backup with procurve HP-5406zl
« on: May 23, 2012, 01:35:41 AM »
My backup with Procurve is working fine(for other models and same username password). Only this model is giving the following error while scaning.
Prepare (CLI) ----------------------------------------------------------------
SSH :.:22 Tout:2s OS:ProCurve EN:(.+?)#\s?(\x1b\[[;\?0-9A-Za-z]+)+$
 PTY :Forking ssh -o 'StrictHostKeyChecking no' -l .
 CLI1:Matched any key, sending ctrl-Y
CLI4:Matched to continue[?25h[?6l[?7l[?25h2395-LRCS-LR0002-SW01-Core-254> [?25h (or gen. prompt with enpass & enable cmd), enabling
CLI7:Matched Password:, sending password
 Use of uninitialized value $match in pattern match (m//) at /var/nedi/inc/libcli-iopty.pm line 523.
 ERR :pattern match timed-out
 DISC:Cli config = pattern match timed-out
 DISC:Config backup error: pattern match timed-out
 MLQ :admin+ 2395-LRCS-LR0002-SW01-Core-254: Config backup error: pattern match timed-out DevRRD ------------------------------------------------------------------
Is there anyone who can backup this model of switch?
any one can help me to resolve this problem?


Discovery / IP address for nodes on HP procurve.
« on: May 10, 2012, 04:50:37 AM »
Hello Everyone,
I could not get IP address in Nodes List after scanning, I am trying to add only Procurve swtichs. models are 2610,2524,53xx,42xx. do we have to do anything in nedi.conf to get this IP address.
I tried to find out in forum for any past post, but no luck. 

Anyone with all Procurve DEF in one ZIP file? Please post it here.


News / Nedi 1.07RC1 - small bug.
« on: December 13, 2011, 04:22:34 AM »
Hello All,
In device write section to write in device the follow three commands are not being sent while writing.
when you click on show button  your command is being appended between this two three line in

conf t
<your Command>
write mem

up to here there is no problem.

when you clik a send button it actully sends only the <your command > .
I am still testing it, will post it here  if there is any bug.

Definition Files / Cisco 3750 POE OID
« on: October 14, 2011, 06:11:01 AM »
HI All/Remo
I have Cisco 3750's. I have in IF Power. it works fine with standard Image, but with Enhanced image. it is not showing me any POE usage.

can anyone help me on this...?I am running 1.0.7.

A request to Remo. On “Device Status" page in "Interfaces" section, can we have OUI, Mac and IP of Nodes? This can be in multiple lines depending on the case.  This will help to visualise the whole switch with all the nodes connected to that particular switch. 
I would like to hear from community as well about my suggestion.


Database / Help needed.
« on: June 24, 2011, 07:41:38 AM »
Hi All/Remo,

As requested earlier if Nedi can support Aruba Network device or not. I got the answer.

I am not a developer but tried something with SNMPwalk PHP script.

I have the DEF files. this device are in DEVICES table and are being monitored.

I want to use my script with NEDI.

can some one Please help me in writing a module which will list all devices
 where type = Aruba.
and If I select one,
 it will pass on the IP and Community string
to my SNMP walk PHP script. or I can call that in to the script?

ready to share the DEF and SNMPwalk.php for Aruba Device.

Pages: [1] 2